White Plantation Shutters
White plantation shutters are widely used in American homes.
Horizon offers two standard paint colors, one white and one off-white. Theses popular finishes blend well with many interiors, resulting in a crisp light appearance.
If a more precise color is required, custom paint colors can be formulated for an additional one time fee.
White Plantation Shutters Standard Colors:
This Shutter Paint Is Similar To:
Benjamin Moore - Super White
Request a sample.
White plantation shutters are sanded, primed, re-sanded, and covered with three premium water based acrylic top coat. The result is a deep, smooth, satin sheen furniture-grade finish.
Custom wood plantation shutters constructed and finished with attention to the slightest detail. The meticulous finishing process concludes with paint sprayed in three coats to assure a thick, smooth, durable surface. The paint is formulated with uv inhibitors to provide additional protection from intense sunlight.
Samples of our standard colors are provide on paper. The chips provided accurately represent the finish color and ensures that all parties are referencing the same master color.
We received our white plantation shutters a week and a half sooner than originally estimated. They arrived in perfect condition, and they were an absolutely perfect fit! They look so good in the windows that we are looking at additional places to install more! I was very impressed, by the way, with the packaging - unbelievably sturdy and precisely tailored for protecting the shutters. Thanks again for a quality product. You get my highest recommendation!
I felt it important to express my feelings about the ease of detailing the shutter measurements and placing my order online, the quality of your work, and your attention to detail that I experienced with my order. In a time when quality of workmanship, especially, seems to be waning, I was extremely impressed with the quality of your white plantation shutters. It was a pleasure doing business with you and will not hesitate to recommend your service and products to anyone.
- measuring workbook
- color charts
- sample shutter
A shutter unit that only covers the lower portion of a window.
A shutter unit that is made specifically for an individual window opening.
A horizontal bar that creates top and bottom louver sections, allowing the sections to rotate independently.
A shutter unit that has one set of shutters on the top and one on the bottom.
Ornamental wood attached to the wall to the outside of the window opening. Generally used to give the window a finished appearance.
Paint or stain.
Used for mounting custom shutter units to the outside of a window opening and can have either 2, 3, or 4 sides.
A vertical strip that extends the length of the shutter unit hinged to the outside stile of a shutter panel. Generally used for cafe type shutter units.
Measurement top to bottom of the window opening according to our measuring instructions. Or, the desired panel height for café type shutters.
A two-leaf device that connects a shutter to the mounting surface or joins two shutters together.
Movable horizontal slats contained within a shutter panel.
A rectangular cavity in shutter stile for inserting a hinge – allowing a tighter fit to the side of the window or frame.
A single shutter. Most shutter units consist of more than one shutter panel.
A cut or groove along the edge of a stile between panels that allows them to form a joint to reduce light penetration.
Horizontal bar at the top, bottom, or across the center (divider rail).
A shutter unit that has one set of shutters from top to bottom.
A window is considered square if the difference between the largest measurement and the smallest is no larger than 3/16 inches and the difference between the diagonal measurements is less than 3/16 inches.
Vertical bar found along either side of a shutter panel.
Traditional or Plantation.
The number of shutter panels from top to bottom. See single tier and double tier.
Vertical bar used for adjusting the louver position.
Shutter panels and other necessary components (frames, hardware, etc.)
that work together to fit a window opening.
Area just beyond the window opening if there is no existing trim.
Measurement side to side of the window opening according to our measuring instructions.
Vertical sides of the window opening. This area will be used to attach a shutter unit using either the INJ or INH installation methods.