Unfinished Wood Window Shutters

wood window shutters

Horizon wood window shutters may be ordered unfinished.

Unfinished wood shutters allow the end user to paint or stain the panels prior to installation. All interior unfinished shutters are made with solid hardwood components and are fully sanded before shipping. Window shutters are offered in grades suitable to either paint or stain.

Unfinished paint grade shutters arrive suitable for painting, but should be primed and sanded before paint is applied. Wood window shutters are not sold primed. White magnets to hold the shutters in a closed position are included with paint grade interior window shutters.

Unfinished stain grade shutters are constructed with components chosen for uniform grain. Wood shutters are shipped sanded and ready to stain. Brown magnets to hold the shutters in a closed position are included with stain grade shutters.

Unfinished wood window shutters are constructed from top quality, kiln-dried basswood. This hardwood is harvested in the northern regions of the United States. Basswood is straight, light, and finishes beautifully.

The shutters showed outstanding workmanship. There were signs of attention to detail such as masking tape over the hinges to protect damage. I would recommend highly.

Deane N.

I already called Brian to rave about the wood window shutters. They are beautiful and look great in the windows. Thank you so much. You followed through on all your promises including time, quality, and price. Thank you for your wonderful product.

Arline C.

I looked at many web sites and in many stores shopping for plantation shutters and chose Horizon Shutters. I couldn't be more happy in my decision. Their products and customer support are excellent. Anyone looking to purchase shutters should seriously consider this company!

Dennis W.

We received the window shutters and absolutely LOVE them. Great job!! People have been asking where we found them because there is not a local distributor here in Arizona. We're sure you'll be getting some calls. Thanks again!

Michael P.

View Shutters
Sample Shutters
  • measuring workbook
  • color charts
  • sample shutter
Request Samples
A shutter unit that only covers the lower portion of a window.
A shutter unit that is made specifically for an individual window opening.
A horizontal bar that creates top and bottom louver sections, allowing the sections to rotate independently.
A shutter unit that has one set of shutters on the top and one on the bottom.
Ornamental wood attached to the wall to the outside of the window opening. Generally used to give the window a finished appearance.
Paint or stain.
Used for mounting custom shutter units to the outside of a window opening and can have either 2, 3, or 4 sides.
A vertical strip that extends the length of the shutter unit hinged to the outside stile of a shutter panel. Generally used for cafe type shutter units.
Measurement top to bottom of the window opening according to our measuring instructions. Or, the desired panel height for café type shutters.
A two-leaf device that connects a shutter to the mounting surface or joins two shutters together.
Movable horizontal slats contained within a shutter panel.
A rectangular cavity in shutter stile for inserting a hinge – allowing a tighter fit to the side of the window or frame.
A single shutter. Most shutter units consist of more than one shutter panel.
A cut or groove along the edge of a stile between panels that allows them to form a joint to reduce light penetration.
Horizontal bar at the top, bottom, or across the center (divider rail).
A shutter unit that has one set of shutters from top to bottom.
A window is considered square if the difference between the largest measurement and the smallest is no larger than 3/16 inches and the difference between the diagonal measurements is less than 3/16 inches.
Vertical bar found along either side of a shutter panel.
Traditional or Plantation.
The number of shutter panels from top to bottom. See single tier and double tier.
Vertical bar used for adjusting the louver position.
Shutter panels and other necessary components (frames, hardware, etc.)
that work together to fit a window opening.
Area just beyond the window opening if there is no existing trim.
Measurement side to side of the window opening according to our measuring instructions.
Vertical sides of the window opening. This area will be used to attach a shutter unit using either the INJ or INH installation methods.