Shutters Doors


Do you sell shutter doors?

Generally people seeking shutter doors are looking for window shutters.

Do you sell exterior shutters?

Yes, but through a different website. See ShutterLand Exterior Shutters for composite and solid wood exterior shutters.

Do you sell fixed louver or raised panel interior shutters?

Yes. Please call 1-888-399-4947 for information.

Do you sell fabric insert window shutters?

No we do not sell fabric insert shutter doors.

Do you sell special shape (arch top, rake top, etc.) window shutters?

We only manufacture rectangular shutter units.

Can you make a 1, 2, 3, 4, 5, 6, or 8 panel unit? How will they fold?

Yes. We can make most panel configurations based on the width of your window opening. You can see more specifics by viewing available configurations of traditional shutters and plantation shutters.

Can a divider rail only be located in the center of a panel?

A divider rail can be located at any height within an interior shutter panel.

What is the difference between traditional and plantation shutters?

The major difference is the size of the louvers, panel thickness and width of the stiles. The best way to see the differences is to view the pages on our web site dedicated to the traditional shutters and plantation shutters.

Do you sell other window coverings?

No, just high quality interior window shutters.

Can I match existing shutters in my home?

This is usually a difficult task unless the original interior shutters came from Horizon Shutters. Sometimes they can be made to look similar. If you are trying to replace one broken panel in a unit, it is virtually impossible to match.

Shutter Blinds

Do you sell shutter blinds?

Generally people seeking shutter blinds are looking for window shutters.


How difficult are shutters to install?

Installation is relatively easy. We ship indoor shutters completely assembled with all of the necessary hardware. It takes on average about 30 - 45 minutes per window for installation. Read more on the installation page.

Can window shutters be mounted on a sliding glass door opening?

Yes. We treat a sliding glass door opening as a large window. The shutter doors attach to either side and open in either direction.

Can interior shutters be mounted only on the lower portion of a window?

Yes, this is called an interior cafe shutter unit.

Can shutters be installed in a window with an opening crank?

Yes, you can install inside shutters in a window with a crank. Many times the crank handle can be removed to provide space for the shutters. The handle can then be replaced when you want to open the window. If the crank unit projects beyond the front plane of the window, you may need to use an outside mount.


Do you ship to Alaska or Hawaii?

Yes, but we will charge you the actual shipping instead of the standard shipping rate.

Do you ship overseas?

We typically do not ship overseas, and limit destinations to locations in the United States. However, if you would like to arrange for an exporter, we would be happy to ship to that location within the United States.

Can you rush my order?

We do not rush orders, cut corners, or compromise quality to reduce production time. All window shutter orders receive the same priority.


Do you make shutters out of alternate woods?

We can make shutters out of most any wood. Please call 1-888-399-4947 for information.

Do you sell poly, synthetic, plastic, or faux wood shutters?

We do not make synthetic shutters.

Will shutters block out all light?

Shutters are not designed to be a "black-out" window covering. Shutters control a large percent of light, but there will be a little light that penetrates between the louvers and stile, between louvers, and between the shutters and window opening.

Price / Value

Do you run specials, sales, or have coupons?

We do not. We have lowered prices as much as possible for Internet sales. We sell to contractors, interior decorators, and homeowners all at the same price.

Are interior shutters considered a capital improvement?

According to the Internal Revenue Service, interior wood shutters are the only window treatment that can be considered a capital improvement.

What is the square foot price of your window shutters?

We do not price by the square foot - which generally inflates prices. Our price is determined based on the square inches, shutter style, finish, and number of panels. You may price a shutter units on our interior shutters prices page.

View Shutters
Sample Shutters
  • measuring workbook
  • color charts
  • sample shutter
Request Samples
A shutter unit that only covers the lower portion of a window.
A shutter unit that is made specifically for an individual window opening.
A horizontal bar that creates top and bottom louver sections, allowing the sections to rotate independently.
A shutter unit that has one set of shutters on the top and one on the bottom.
Ornamental wood attached to the wall to the outside of the window opening. Generally used to give the window a finished appearance.
Paint or stain.
Used for mounting custom shutter units to the outside of a window opening and can have either 2, 3, or 4 sides.
A vertical strip that extends the length of the shutter unit hinged to the outside stile of a shutter panel. Generally used for cafe type shutter units.
Measurement top to bottom of the window opening according to our measuring instructions. Or, the desired panel height for café type shutters.
A two-leaf device that connects a shutter to the mounting surface or joins two shutters together.
Movable horizontal slats contained within a shutter panel.
A rectangular cavity in shutter stile for inserting a hinge – allowing a tighter fit to the side of the window or frame.
A single shutter. Most shutter units consist of more than one shutter panel.
A cut or groove along the edge of a stile between panels that allows them to form a joint to reduce light penetration.
Horizontal bar at the top, bottom, or across the center (divider rail).
A shutter unit that has one set of shutters from top to bottom.
A window is considered square if the difference between the largest measurement and the smallest is no larger than 3/16 inches and the difference between the diagonal measurements is less than 3/16 inches.
Vertical bar found along either side of a shutter panel.
Traditional or Plantation.
The number of shutter panels from top to bottom. See single tier and double tier.
Vertical bar used for adjusting the louver position.
Shutter panels and other necessary components (frames, hardware, etc.)
that work together to fit a window opening.
Area just beyond the window opening if there is no existing trim.
Measurement side to side of the window opening according to our measuring instructions.
Vertical sides of the window opening. This area will be used to attach a shutter unit using either the INJ or INH installation methods.