Traditional Indoor Shutters
Select a "Unit Type" above which defines the vertical configuration of the indoor shutters.
Next, choose the number of shutters from left to right to cover the window opening. Options include one, two, three, four, or six traditional shutters across.
The resulting image represents a traditional shutter unit using the selected configuration. The image demonstrates the most common fold pattern (how the shutters are hinged). Alternative sizes, finishes (painted shutters or stained shutters), and fold patterns are available. The image likely does not represent the same proportions as the window in your home. Indoor shutters are custom built to the 1/16 inch for each individual window.
Shutter prices are calculated basted on the shutter style, finish, and configuration of the shutter unit. Quickly receive a quote for interior shutters from our online pricing calculator. We have kept shutter prices as low as possible for internet sales, while maintaining the highest quality in the industry.
The indoor shutters arrived in excellent condition, they have been installed and the client is happy. You have a fine quality product which I am happy to work with and recommend. I look forward to our next opportunity to do business.
Just wanted you to know that we really love our shutters!! They are perfect in every way. It seemed a little scary to order something like this over the internet, but we are so glad we did! It was so easy and the quality is first class. Installation was a breeze.
This is not a question, just positive feedback on how pleased we are with the quality of the indoor shutters we received from you. Measurements, color, packing for shipping, promised delivery date--all were very well done. Today I installed the shutters, and it all went very smoothly. Thank you for your quality product and good service.
- measuring workbook
- color charts
- sample shutter
A shutter unit that only covers the lower portion of a window.
A shutter unit that is made specifically for an individual window opening.
A horizontal bar that creates top and bottom louver sections, allowing the sections to rotate independently.
A shutter unit that has one set of shutters on the top and one on the bottom.
Ornamental wood attached to the wall to the outside of the window opening. Generally used to give the window a finished appearance.
Paint or stain.
Used for mounting custom shutter units to the outside of a window opening and can have either 2, 3, or 4 sides.
A vertical strip that extends the length of the shutter unit hinged to the outside stile of a shutter panel. Generally used for cafe type shutter units.
Measurement top to bottom of the window opening according to our measuring instructions. Or, the desired panel height for café type shutters.
A two-leaf device that connects a shutter to the mounting surface or joins two shutters together.
Movable horizontal slats contained within a shutter panel.
A rectangular cavity in shutter stile for inserting a hinge – allowing a tighter fit to the side of the window or frame.
A single shutter. Most shutter units consist of more than one shutter panel.
A cut or groove along the edge of a stile between panels that allows them to form a joint to reduce light penetration.
Horizontal bar at the top, bottom, or across the center (divider rail).
A shutter unit that has one set of shutters from top to bottom.
A window is considered square if the difference between the largest measurement and the smallest is no larger than 3/16 inches and the difference between the diagonal measurements is less than 3/16 inches.
Vertical bar found along either side of a shutter panel.
Traditional or Plantation.
The number of shutter panels from top to bottom. See single tier and double tier.
Vertical bar used for adjusting the louver position.
Shutter panels and other necessary components (frames, hardware, etc.)
that work together to fit a window opening.
Area just beyond the window opening if there is no existing trim.
Measurement side to side of the window opening according to our measuring instructions.
Vertical sides of the window opening. This area will be used to attach a shutter unit using either the INJ or INH installation methods.